Nokia 105 Dual Sim Display Light Jumper Problem Ways

This solution below shows the Nokia 105 RM-1133 LCD display backlight components that holds and control for the LCD screen display backlight to glow. If one of these components may become faulty due to wet or water damaged it will result to LCD’s backlight failure.

You may need to follow the association line tracks, supply voltages and check a portion of the backdrop illumination Drove driver parts appeared on the arrangement above. You may begin to check the highlighted parts for it is more inclined to be effectively harmed when a short out happened. Check and supplant if effectively discovered harmed.

Answer for Nokia 112 Not working LCD show backdrop illumination Drove White Presentation Issue






Here s some hints on how to troubleshoot the Nokia 105 RM-1133 LCD display backlight not working problem
 ” Note: ensure that the Lcd is okay or try replacing it before proceeding”
 1. Check the LCD pin connector for possible damaged, resolder if necessary.
 2. Trace each of the LED + (positive and LED – (negative connection line paths down to the resistors where it is being connected.
 3. Check the connected resistor, replace if found damaged.

Check the pin connector get together and guarantee to clean it also.

Check the showcase channel resistors including the LCD supply voltage and follow the association tracks to the LCD pin connector. Supplant the harmed resistor or brain to reconnect if there is an open line ways.

On the off chance that you have further inquiries kindly don't delay to leave a remark.

Note: Each repairing arrangement posted here is tried by no less than one colleague. Utilize the data accessible here at Your Own Danger. We are not dependable if any mischief goes to your gadget amid the repairing procedure.

Nokia 105 RM-1133 LCD Show Light IC Arrangement Jumper Issue Ways LCD Show Light Not Working

Nokia 105 RM-1133,LCD Show Light Ways,Display Light Problem,Display Light Solution,Display Light Jumper

Post a Comment

 
Top